Four Plate, Cushion Cover - Pull Type - CP8884

Four Plate, Cushion Cover - Pull Type - CP8884
Typical Application:
- GT3 and GT

- Cushioning in Cover
 - Assyemtric designed cover.
- offers 10% reduction in weight and increased stiffness..
- Benefits from a drive system, featuring drive tenons, which locate into internal jaws of the lugs.
- five times more durable than conventional clutch design when subjected to the same test parameters.
- eradicates distorting of pressure plates trapping on lugs.

- Pull type.
- Flat f
lywheel fixing.
outer diameter location.
- 12 bolt, one piece forged cover and lugs.
machined from aluminium alloy.

- Black hard anodised.
- New innovative wear plate design fitted.
- combats wear on the drive lugs.

- Very low wear rate.
- Individually tested &
 match machined, balanced and clutch load recorded
- Mounting studs available, CP4703.

Available Part Numbers:
- CP8884-OH90-FR.
Torque Capacity Nm (lb/ft)1392 (1026)
Release Load - Max peak worn - daN530
Release Load - At Travel - daN530
Set-up Height - New37.43mm / 33.95mm
Set-up Height - Worn27.33mm
Clutch "Wear In"1.50mm
Estimated weight (including D/Plates) - Kg4.0kg
Estimated Assembly Inertia0.0136Kgm²
Estimated D/Plate Inertia0.0024175Kgm²
Optional Slave CylinderCP6245-7
Driven PlatesDriven Plate Thickness
New = 2.63mm Nom. / Worn = 2.26mm.
Driven Plate Types
CP3683 type driven plate- Large area back to back
CP3683-17FM3 - 1 5/32"x26 spline

- Other splines available see sintered driven plate chart

N.B. clutch supplied less driven plates

Main Pressure PlateCP8884-103
Intermediate Pressure PlatesCP8773-103 x 3
Release bearing fulcrumCP8884-106
Click on the link to download the relevant drawing
Customer Drawing