CP7203 Standard Duty Clutch Family - 0.5mm Wear In

CP7203 Standard Duty Clutch Family - 0.5mm Wear In
TYPICAL APPLICATION:
- AustralianTouring Car.
- GT / Endurance


FEATURES:
- 12 Bolt, One piece cover and lugs.
- Push type.
- Very High Ratio (VHR) only. 
- Steel pressure plates.
- Heavy duty carbon material only.
- Replaces CP6193 Family.

AVAILABLE OPTIONS:
- Two Diaphragm Spring Variants:
 - C (CRV).
 - T (Triple GRY).
- One Cover & Pressure Plate Material Variant:
- (02) Steel Cover & Steel P/Plates.
- Flywheel Options:
- SN = Standard Stepped.
SC = Stepped with CFS (Cushion Flywheel System)

SAMPLE PART NUMBER:
- CP7203-CV02-SN.
- Other part numbers available please refer to Installation drawing below or contact AP Racing Technical Section.
TECHNICAL SPECIFICATIONS FOR - CP7203-TV02-SC
Torque Capacity - Nm (lbs/ft)1303 (961)
Clutch "Wear In" - mm0.5
Total Allowable Carbon
Stack Wear - mm
6.0
RELEASE LOADS
Max Peak Worn375daN
At Travel250daN
SET UP HEIGHTS - in mm
New45.73 / 43.61
Worn47.84
Weight - Kg4.0
Complete Assy Inertia0.021977
Driven Plate & Hub Inertia0.003994
MAIN PRESSURE PLATES
Download fitment guide for Part Nos
Ratio OptionsVerh High (VHR)
Material OptionsSteel
Pressure Plate Kits- .5mm to 2.5mm (0.5mm Steps) = CP7203-10
- .25mm to 2.25mm (0.5mm Steps) = CP7203-11
HUB OPTIONS
MaterialSteel
Sample Spline Size & Part No1.16"x 26 = CP7203-103S
SUITABLE RELEASE BEARINGS
Inner Race RotatesCP3457-6
Outer Race RotatesCP3457-2 or CP3457-10