CP8039 Clutch Family - 1.25mm ‘Wear In’

CP8039 Clutch Family - 1.25mm ‘Wear In’
TYPICAL APPLICATION:
- Touring Cars.


FEATURES:
- 12 Bolt, One piece Aluminium cover and lugs.
- Push type.
- Steel pressure plate.
- Heavy & normal duty carbon stack options.
- Very high ration (VHR) option only.
- Stepped flywheel fixing
 
-   inner diameter location
- Cushion pressure plate fitted.
- Supercedes CP8032 family.


AVAILABLE OPTIONS:
- Two Diaphragm Spring Variants:
- C (CRV).
- O (ORA).
- Three cover / Pressure plate material & carbon type variants:
- (01) Aluminium / Steel & Normal duty
- (02) Aluminium / Steel & Heavy duty.
- (22) Aluminium / Steel & medium duty.
- Flywheel Options:
- SN = Standard stepped.
- SP = Stepped with CPS (Cushion Pressure Plate System)

SAMPLE PART NUMBER:
- Twin plate, stepped flywheel with cushion pressure plate.

- CP8039-CV02-SP.
- ‘P’ Suffix denotes cushion pressure plate using fulcrum ring type pressure plate.
- Other part numbers available please refer to Installation drawing below or contact AP Racing Technical Section.
TECHNICAL SPECIFICATIONS FOR -
CP8039-OV02-SP
Torque Capacity Range - Nm (lbs/ft)629Nm (463)
Clutch "Wear In" Range - mm1.25
Total Allowable Carbon
Stack Wear - mm
4.0
RELEASE LOADS
Max peak worn375daN
At travel295daN
SET UP HEIGHTS - in mm
New33.25 / 31.81
Worn - in mm37.91
Weight Range - Kg2.97
Complete Assembly Inertia0.017689Kgm²
Driven Plate & Hub Inretia0.00253Kgm²
MAIN PRESSURE PLATES:
Download Fitment Guide for
Part No"s
Ratio OptionsVery high (VHR)
Material optionsStainless Steel
Pressure Plate Kits- .5mm to 2.5mm (0.5mm Steps) = CP8032-8
- .25mm to 2.75mm (0.5mm Steps) = CP8032-9
HUBS OPTIONS
Material Steel
Sample Spline Size & Part No- 1.00 x 23 = CP7832-120S
- 25.5mm x 25 = CP7832-121S
SUITABLE RELEASE BEARINGS:
Outer Race RotatesCP3457-19
Click on the link to download the relevant drawing
- Customer Drawing