CP7202 Standard Duty Clutch Family - 0.5mm Wear In

CP7202 Standard Duty Clutch Family - 0.5mm Wear In
TYPICAL APPLICATION:
- Touring Car.
- GT / Endurance


FEATURES:
- 12 Bolt, One piece cover and lugs.
- Push type.
- Extra High Ratio (EHR) only. 
- Steel pressure plates.
- Standard or heavy duty carbon material available.
- Replaces CP6192 Family.

AVAILABLE OPTIONS:
- Three Diaphragm Spring Variants:
 - C (CRV).
 - O (ORA).
 - T (Triple GRY).
- Cover & Pressure Plate Material Variants:
- (01) Aluminium Cover & Stainless Steel P/Plates.
- (02) Steel Cover & Stainless Steel P/Plates.
- Flywheel Options:
- SN = Standard Stepped.
SC = Stepped with CFS (Cushion Flywheel System)

SAMPLE PART NUMBER:
- CP7202-CE01-SN.
- Other part numbers available please refer to Installation drawing below or contact AP Racing Technical Section.
TECHNICAL SPECIFICATIONS FOR - CP7202-CE01-SN
Torque Capacity- Nm (lbs/ft)868 (640)
Clutch "Wear In" - mm0.5
Total Allowable Carbon
Stack Wear - mm
4.0
RELEASE LOADS
Max Peak Worn375daN
At Travel250daN
SET UP HEIGHTS - in mm
New36.60 / 34.55
Worn39.75
Weight - Kg2.91
Complete Assy Inertia0.01656Kgm²
Driven Plate & Hub Inertia0.002612Kgm²
MAIN PRESSURE PLATES
Download fitment guide for Part Nos
Ratio OptionsExtra High (EHR)
Material OptionsSteel
Pressure Plate Kits- .5mm to 3.5mm (0.5mm Steps) = CP3653-3
- .25mm to 3.25mm (0.5mm Steps) = CP3653-4
HUB OPTIONS
MaterialSteel
Sample Spline Size & Part No1.00"x 23 = CP4202-122S
SUITABLERELEASE BEARINGS
Inner Race RotatesCP3457-6
Outer Race RotatesCP3457-2 or CP3457-10
Click on the link to download the relevant drawing
CP7202 Customer Drawing
maintenance Guide
Release Bearing Drawing