CP5200 Family - 152mm Mounting Centres - 16.8mm thick pad

CP5200 Family - 152mm Mounting Centres - 16.8mm thick pad
IMPORTANT NOTE:
CP5200 CALIPERS ARE NO LONGER AVAILABLE TO ORDER. 
THIS PRODUCT INFORMATION REMAINS ON THE WEBSITE FOR GUIDANCE ONLY.
CP9200 FORGED CALIPERS ARE CP5200 REPLACEMENTS BUT NOT A DIRECT REPLACEMENT. FOR FURTHER GUIDANCE SEE BELOW OR CONTACT AP RACING TECHNICAL SALES DEPARTMENT.
 
IMPORTANT NOTE: CP9200 replaces CP5200 family BUT IS NOT A DIRECT REPLACEMENT DIMENSIONALLY
Whilst mounting hole centres, offset and PL dimensions are the same as CP5200-806/7/8/9S4 variant, there are differences in the radial profiles dimensions and pad location - please check installation before purchasing.
When replacing CP5200 calipers with CP9200 in brake kits please contact AP Racing technical for guidance.
 
Applications:
- Performance Road Front.
- Factory Brake Kits.

Features:
- Radial Mount, 152mm centres.
- Suits Ø330 max / Ø304 min x 32 or 28mm thick discs.
- Cast two piece Aluminium alloy body.
- Aluminium alloy pistons.
- Piston dirt seals fitted. 
- Advanced Red or Black anti-corrosion paint finish.
- Steel wear plates.
- Pad anti-rattle clip fitted.

Black Caliper Part Numbers:
- TO SUIT DISC Ø330.0x32.0mm.
- RHT = CP5200-802S4 / - LHT = CP5200-803S4.
- RHL = CP5200-804S4 / - LHL = CP5200-805S4.
- TO SUIT DISC Ø330.0x28.0mm.
- RHT = CP5200-806S4 / - LHT = CP5200-807S4.
- RHL = CP5200-808S4 / - LHL = CP5200-809S4.
- TO SUIT DISC Ø304.0x32.0mm.
- RHT = CP5200-810S4 / - LHT = CP5200-811S4.
- RHL = CP5200-812S4 / - LHL = CP5200-813S4.

Red Caliper Part Numbers:
For Red calipers add 'R2' to end of Part Number e.g.
CP5200-802S4R2
Brake Pad Information
(To view larger image of pad
click on Pad Part No)
CP3215D50
cp3215d50
- Pad Area = 57.4cm²
- Pad Depth = 50.3mm
- Thickness = 16.8mm
CALIPER TECHNICAL SPECIFICATIONS
Piston Sizes - mm- Ø38.1 x 2
- Ø41.3 x 2
Piston Area - cm³49.56
Disc Diameter - mm- Max = Ø330.0 / - Min = Ø304.0
Disc Thickness - mm- CP5200-802 to -805 = 32.0
- CP5200-806 to -809 = 28.0
- CP5200-810 to -813 = 32.0
Weight (no pads) - Kg2.4
Hydraulic ThreadsM10x1.0
Mounting TypeRadial
Mounting Centres - mm152.0
Mounting Offset - mm- CP5200-802 to -805 = 50.93
- CP5200-806 to -809 = 46.86
- CP5200-810 to -813 = 50.93
Mounting Hole Ø - mm10.1
‘PL’ Dimension - mm60.36
Bleed Screw Tightening Torque17Nm
CALIPER SPARES
PistonsCP5200-802 to -805 & -810 to -813
- Ø38.1 = CP2409-124
- Ø41.3 = CP2290-50
CP5200-806 to -809
- Ø38.1 = CP2889-105
- Ø41.3 = CP3357-111
Seal Repair KitCP4519-JK
Pad Retainer Type / Part NoBolt /
-CP5200-802 to -805 & -810 to -813 = CP5200-110
- CP5200-806 to -809 = CP5200-124
Pad Retainer Bolt Part No-CP5200-802 to -805 & -810 to -813 = CP3894-139
- CP5200-806 to -809 = CP3596-112
Wear PlatesCP5200-306 x 2
CP5200-307 x 2
Anti-knockback SpringsCP6518-4LBLL
Bleed ScrewCP3720-173
Click on the link to download the relevant drawing
CP5200 Customer Drawing